SINUS Verteiler

Hydronic junction with directly welded sinus manifold made of square profiles 80/60, 37-2 steel with welded endpieces. Hydronic junction consisting of a vertical, rectangular chamber with two lateral 1 ¼” NPT-threaded pipe nipples for the connection of the heat source as well as ½” couplings for air purging, sensor and draining. G 1 ½” union nut for connecting the heating circuits. Sinus manifold as combined flow and return manifold with adjacent chambers divided by a sinusoidal parting wall. Connection of junction and manifold by directly welded flow pipe; connection of return pipe by square profile running vertically parallel to the junction. Additional ½” coupling in the lower secondary flow pipe. The Sinus Hydronic Unit was pressure tested and primed in our factory.

• Connection, heating circuits: 1 1/2“ union nut
• Connection, boiler circuits: 1 1/4“ NPT

Thermal insulation, included in the set

In compliance with EnEV 2014 consisting of half shells with end pieces and cutouts for all nozzles.

Wall bracket, included in the set

Soundproof and zinc-plated, consisting of wall panel for screw fastening and bracket, outreach up to manifold centre: 160 mm

(2 wall brackets are included in each set)

Maintenance box - Magnetite separation module

Enables desludging with pressurized system. Consisting of section tube 80x60, material S235, connection: 2x G 1 ½“. Equipped with desludging nozzle and ball valve ½“, and magnetic rod screwed into the thermwell. For attachment to the boiler return line beneath the manifold.

Set components: EPP insulation in compliance with EnEV, ball valve, magnetite filter cartridge

Identification plate

Made of galvanized sheet steel with transparent cover for three-line label for screw fixing to the thermal insulation. Size: 100 x 50 mm, colours: red for flow line / blue for return line